Indoor Wooden Benches

indoor wood bench plans woodworking plans firewood rack wooden

indoor wooden benches. Adding a bench will decorate any area of your home, but you will need to care for it in order to get many years worth of use from it. By taking a little time each year for maintenance, your bench can look great for quite a while.

To protect a wood bench for the exterior element, you will need to use a surface finish to those to help protect the timber. You can use car paint or stain to safeguard the real wood. This can help deter the real wood from becoming weathered and decaying to the idea it falls aside and becomes unsafe for use.

Before painting or staining a bench, the top should be prepared. Work with a fine-grain sandpaper to fine sand the top of bench. The goal of this is to expose fresh timber so that the bench may easily recognize the new stain or coloring that you apply.

After sanding, you will need to clean from the sawdust from the surface. This can be finished with a clean dried soft rag to eliminate the dust. You could also use a string blower to eliminate the dirt too. You will need the sanded surface to be clean of any dust particles and mud and dry to get the stain.

Once you’ve clean the bench, it is now ready fro its new finish off to be applied. Remember if you are using stain, it’ll change the colour of the wood. Generally when you go to buy stain at a do-it-yourself store, you will see a good example of how it will look on a bit of wood on display. This can help you choose the best color for your bench.

Apply the stain r paint with the mini-roller or a paintbrush. Make sure to apply uniformly throughout the bench. Key areas going to are the joint parts and where the screws are. These areas are the most vunerable to the elements.

Enable the bench to dried up. After it is dried out, you should then apply a second cost to increase the protection and catch any spots you might have overlooked with the first overcoat.


Leave a Reply

Your email address will not be published. Required fields are marked *