Reclaimed Wood Bench Diy

d i y assymetrical plank bench

reclaimed wood bench diy. Adding a bench will decorate any area of your home, but you will need to manage it to be able to get many years worth useful out of it. By taking a little time every year for maintenance, your bench can look great for quite a while.

To protect a timber bench for the outside element, you’ll need to apply a carry out to these to help protect the timber. You should use color or stain to protect the hardwood. This will help deter the lumber from becoming weathered and decaying to the point it falls apart and becomes unsafe for use.

Before painting or staining a bench, the top should be prepared. Make use of a fine-grain sandpaper to sand the top of bench. The purpose of this is to expose fresh solid wood so the bench can simply accept the new stain or car paint that you apply.

After sanding, you’ll need to clean from the sawdust from the top. This is done with a clean dried up soft rag to remove the dust. You could also use a string blower to remove the dust too. You will want the sanded surface to be clean of any dust particles and dirt and grime and dry to get the stain.

After you have clean the bench, it is now ready fro its new end to be applied. Remember if you are using stain, it’ll change the color of the solid wood. Generally when you go to buy stain at a do-it-yourself store, you will see a good example of how it will look on a bit of wood on display. This will help you choose the best color for your bench.

Apply the stain r car paint with the mini-roller or a paintbrush. Be sure to apply evenly throughout the bench. Key areas to hit are the bones and where in fact the screws are. These areas will be the most susceptible to the elements.

Allow for the bench to dry out. After it is dry, you should then apply a second cost to enhance the protection and get any spots it’s likely you have skipped with the first layer.

Tags:

Leave a Reply

Your email address will not be published. Required fields are marked *