Simple Wooden Bench

diy outdoor wood benchsmart diy solutions for renters

simple wooden bench. Adding a bench will decorate any area of your house, but you will need to look after it to be able to get a long time worth of use from it. By taking a while every year for maintenance, your bench will look great for quite a while.

To safeguard a lumber bench for the outside element, you will need to use a finish off to these to help protect the real wood. You should use paint or stain to safeguard the solid wood. This will help deter the hardwood from becoming weathered and decaying to the idea it falls apart and becomes unsafe for use.

Before painting or staining a bench, the top will need to be prepared. Work with a fine-grain sandpaper to fine sand the surface of the bench. The purpose of this is to expose fresh real wood so the bench may easily admit the new stain or coloring that you apply.

After sanding, you will need to clean off of the sawdust from the surface. This can be done with a clean dry out soft rag to remove the dust. You could also use a string blower to eliminate the dust too. You will need the sanded surface to be clean of any dust and mud and dry to receive the stain.

After you have clean the bench, it is currently ready fro its new finish to be applied. Remember if you work with stain, it’ll change the color of the solid wood. Generally when you go to buy stain at a home improvement store, you will notice an example of how it will look on a piece of wood on display. This will help you choose the best color for your bench.

Apply the stain r color with the mini-roller or a paintbrush. Make sure to apply evenly throughout the bench. Key areas to hit are the joint parts and where in fact the screws are. These areas will be the most vunerable to the elements.

Allow for the bench to dried out. After it is dried, you should then apply another cost to improve the protection and capture any spots it’s likely you have skipped with the first coat.


Leave a Reply

Your email address will not be published. Required fields are marked *