Solid Wood Entry Bench

amish mission slat solid wood upholstered bench entryway kitchen

solid wood entry bench. Adding a bench will decorate any area of your house, but you will need to take care of it in order to get a long time worth useful from it. By taking a little time every year for maintenance, your bench can look great for quite a while.

To protect a timber bench for the exterior element, you’ll need to apply a surface finish to these to help protect the hardwood. You can use color or stain to protect the timber. This will help deter the solid wood from becoming weathered and decaying to the point it falls apart and becomes unsafe for use.

Before painting or staining a bench, the top will need to be prepared. Make use of a fine-grain sandpaper to sand the surface of the bench. The purpose of this is to expose fresh solid wood so the bench can certainly agree to the new stain or paint that you apply.

After sanding, you’ll need to clean off of the sawdust from the top. This is done with a clean dried soft rag to eliminate the dust. You could also use a string blower to remove the dust too. You will want the sanded surface to be clean of any particles and dirt and grime and dry to receive the stain.

Once you’ve clean the bench, it is currently ready fro its new carry out to be employed. Remember if you are using stain, it’ll change the color of the real wood. Generally when you go to buy stain at a do-it-yourself store, you will notice a good example of how it will look on a bit of wood on display. This can help you choose the right color for your bench.

Apply the stain r coloring with the mini-roller or a paintbrush. Make sure to apply evenly throughout the bench. Key areas going to are the joints and where the screws are. These areas are the most susceptible to the elements.

Allow for the bench to dry. After it is dried, you should then apply a second cost to increase the protection and capture any spots it’s likely you have missed with the first coating.

Tags:

Leave a Reply

Your email address will not be published. Required fields are marked *