wood chest bench. Adding a bench will dress up any area of your house, but you’ll need to care for it in order to get many years worth of use from it. By taking a while each year for maintenance, your bench can look great for quite a while.
To safeguard a timber bench for the exterior element, you’ll need to use a finish off to them to help protect the hardwood. You can use car paint or stain to safeguard the real wood. This will help deter the solid wood from becoming weathered and decaying to the idea it falls aside and becomes unsafe for use.
Before painting or staining a bench, the surface should be prepared. Utilize a fine-grain sandpaper to sand the surface of the bench. The purpose of this is to expose fresh lumber so that the bench can certainly acknowledge the new stain or color that you apply.
After sanding, you will need to clean off of the sawdust from the surface. This can be done with a clean dried soft rag to eliminate the dust. You could also use a string blower to remove the dust particles too. You will need the sanded surface to be clean of any dust particles and dirt and grime and dry to receive the stain.
After you have clean the bench, it is now ready fro its new finish to be applied. Remember if you are using stain, it’ll change the color of the solid wood. Generally when you go to buy stain at a home improvement store, you will notice an example of how it’ll look on a bit of wood on screen. This will help you choose the right color for your bench.
Apply the stain r coloring with either a mini-roller or a paintbrush. Make sure to apply consistently throughout the bench. Key areas going to are the bones and where in fact the screws are. These areas are the most susceptible to the elements.
Allow for the bench to dry out. After it is dry out, you should then apply a second cost to increase the protection and get any spots it’s likely you have overlooked with the first overcoat.