Wooden Workbench Tops

michgan maple block solid wood counter tops |solid wood counter

wooden workbench tops. Adding a bench will dress up any area of your house, but you will need to take care of it to be able to get a long time worth useful from it. By taking a little time each year for maintenance, your bench can look great for a long time.

To protect a solid wood bench for the outside element, you’ll need to apply a surface finish to them to help protect the lumber. You should use car paint or stain to protect the real wood. This can help deter the solid wood from becoming weathered and decaying to the idea it falls apart and becomes unsafe for use.

Before painting or staining a bench, the top should be prepared. Use a fine-grain sandpaper to sand the surface of the bench. The purpose of this is to expose fresh solid wood so the bench may easily allow the new stain or paint that you apply.

After sanding, you’ll need to clean off of the sawdust from the top. This is done with a clean dried soft rag to remove the dust. You might use a string blower to remove the particles too. You will need the sanded surface to be clean of any particles and dirt and grime and dry to receive the stain.

After you have clean the bench, it is currently ready fro its new finish off to be employed. Remember if you work with stain, it’ll change the color of the wood. Generally when you go to buy stain at a home improvement store, you will see an example of how it’ll look on a piece of wood on screen. This can help you choose the best color for your bench.

Apply the stain r coloring with either a mini-roller or a paintbrush. Be sure to apply equally throughout the bench. Key areas to hit are the joint parts and where the screws are. These areas are the most vunerable to the elements.

Enable the bench to dried out. After it is dry, you should then apply a second cost to increase the protection and capture any spots it’s likely you have overlooked with the first layer.

Tags:

Leave a Reply

Your email address will not be published. Required fields are marked *